Replacement joystick for AV320, AV340 AV380 with ornate handle. Fits perfectly and tested to work. INSTRUCTIONS: Simply remove the face, heat the 6 contacts with a soldering iron (3 on top) & 3 on bottom. Lift old switch from board. It solders flat to the board. To replace, put small drop of soldering on each contact of the switch, making sure there is no overflow to short one contact with the other. Hold in place while lining up the 6 contacts, heat lightly with soldering iron until the soldering bonds. You may use the sharp point of a knife or small flat scewdriver, gently prise up on the switch when you heat the contacts for the switch to come up.
| 
